Skip to main content

Supported configurations and recalibration

Supported camera placement​

Only Local Anchor is supported. The following features are not supported:

  • World Anchor
  • Pin 1–3
  • Movement using Holoport or teleport
Local AnchorWorld AnchorPin 1–3Holoport / teleport

After calibration​

  • Do not switch the camera between front and rear (selfie and outward-facing). If you do, switch it back or calibrate again.
  • The tracking range is approximately 2.5 m around the avatar. Sync pauses temporarily outside this range and resumes when you return.
  • The app reconnects automatically after changing worlds.
  • Calibrate again after changing or reloading your avatar.
  • When you end sync, you can place the dummy head manually again with the A button.
Tracking range (top view)
When to recalibrate
Recalibrate
  • You changed or reloaded your avatar
  • You switched the camera between selfie and outwardNot needed if you switch it back
Recovers automatically
  • You moved to another worldReconnects automatically
  • The camera left the rangeResumes within about 2.5 m

Smooth Movement​

During calibration, the app temporarily turns VRChat camera Smooth Movement OFF and checks it. After calibration, it restores the original ON/OFF setting and sets the strength to 5 if it was above 5. Only turn it off manually in VRChat if the app reports that its automatic check failed.